History

The last turbojet submitted by Messerschmitt during World War II (1939-1945) became Project P. 1112. This advanced design adopted a tailless configuration when company founder Willy Messerschmitt realized the consistent pattern of RLM to introduce a tailless design. The high-speed, swept-back wings envisioned for the aircraft are in play, and jet turbines are designed to power the type.

Ultimately, however, like many other proposed German jets, the P. 1112 was either cancelled or abandonedsome ended on a political level, while others simply ended with the war itself.

The Messerschmitt Group had its greatest success in delivering the Me 262 'Schwalbe' jet fighter to the Luftwaffe, which proved to be a viable fighter by the end of the war - despite available data The impact on the Luftwaffe was large and the conflict was limited as a result. The company never had the same success, as its subsequent designs failed to impress the authorities.

Numerous drafts with project names were submitted, but none came to fruition.

This led to Proposition P. 1112, the advancement of which encouraged design research. Work began in early 1945 and resulted in P. 1111 (detailed elsewhere on this page). Assuming a wing sweep angle of 45 degrees, its surface forms a wing configuration near the delta.

A single vertical stabilizer was installed without a horizontal stabilizer. A jet engine would power the model through two air intakes on the sides of the fuselage (another drawing of the proposed plane shows the air intakes mounted on the wing roots). The design is a hybrid wing approach with no real definition between the fuselage and wing elements.

Proposed armament consists of 2 x 30mm MK 108 guns on the nose and 2 x 30mm MK 108 guns on the leading edges of the wings (one gun per wing). The engine of choice became the Heinkel-Hirth HeS 011 series with 2,866 pounds of thrust.

A single-seat cockpit is just ahead of center, and three-wheel landing gear completes the familiar feature list.

When this template was finally reviewed by RLM, it was found to be flawed, forcing Messerschmitt engineers to revise the proposal. A major change was moving the cockpit forward, closer to the nose, which resulted in the nose cannon weapons being relocated to the wings, where they were attached to the machine guns. The transfer of this assembly results in an increase in internal volume, allowing more fuel to be carried and better protection of the fuel tank from damage/enemy fire.

The wing surface area has been reduced to provide better stability at higher speeds and reduce the overall weight of the aircraft.

Wooden model of the aircraft in progress when Germany surrendered in May 1945. However, that's all there is to know about the project, as it was occupied by the conquering American forces in Oberammergau.

As a result, the P. 1112 never became a specific military product of the Luftwaffe, and the remains of the project are believed to have been scrapped shortly after the war.

Details for the P. 1112 include a length of 8.25 meters, a wingspan of 8.75 meters and a height of 2.85 meters. The curb weight is listed at 5,050 lbs and the maximum takeoff weight (MTOW) is 10,300 lbs.

Estimated performance specs are a top speed of 685 mph and a service cap within a 46,000-foot range.

Specification

Basic

Year:
1945
Status:
Cancel
Staff:
1

Production

[0 units]:
Messerschmitt - Nazi Germany

Roles

- Fighter

- Intercept

- X-Plane / Development

Dimensions

Length:

27.07 ft (8.25 m)

Width:

8.74m

Height:

2.84m

Weight

Curb Weight:

2,300 kg

MTOW:

10,307 lb (4,675 kg)

(difference: +5,236 pt)

Performance

1 x Heinkel HeS 011A0 turbojet with 2,700 lbs of thrust.

Performance

Maximum Speed:

684 mph (1,100 km/h; 594 knots)

Service Limit:

45,932 ft (14,000 m; 8.7 mi)

Maximum range:

466 miles (750 km; 405 nmi)

Armor

Suggested standard:

4 x 30mm MK 108 guns or 2 x 30mm MK 108 guns and 2 x 30mm MK 103 guns.

Alternatives:

1 x 50mm MK 214 cannon

1 x 55mm MK 112 gun

Changes

p. 1112 - Basic Project Descriptions

ContactPrivacy Policy