History of Sopwith Cuckoo

Torpedo bombers emerged as military aircraft groups prior to World War I (1914-1918), when advances in aviation made it possible to carry torpedo weapons. Before the Great Conflict, the British, Americans and Italians had all tried the concept in one form or another.

Once total war broke out, naval aviation began to use torpedo bombers on a regular basis, and aircraft were eventually designed specifically for this role.

With the war in full swing in October 1916, the British authorities turned to Sopwith Air, maker of the famous "Camel" biplane, to design and develop a new biplane bomber that would It can be launched from the deck of a moving ship along its belly carrying the torpedo. This is the "T.

1", a single-seat, single-engine biplane with traditional aircraft qualities, including an open-air cockpit, fixed-wheel landing gear and tail. To make up for the limited space on the carrier at the time, the T.1's wings were designed to fold back against the fuselage. With no fishing gear installed, the T.1 can take off from the boat but cannot land on it. Instead, it's designed for water landings and can be recovered. Her war load was a 1 x 1,000 lb Mk.

IX series torpedo, which was dropped under the hull. Power is provided by a 200 hp Hispano-Suiza 8Ba engine located in the nose, driving a two-bladed wooden propeller.

The first flight of the T.1 prototype was recorded in June 1917, and tests were followed by formal evaluations that continued into the summer. Satisfied with what they had, the Royal Navy committed to buying 100 of these planes through an initial series order, but a shortage of the necessary engines meant the airframe was modified to accept the 200 hp Sunbeam "Arabian" engine.

Both Fairfield Engineering and Pegler and Company were used to provide the required manufacturing facilities - although neither had experience building fighter jets.

It seems that a lot of people are already against the promising T.1, known as "Kuckuck" at the time. To spur mass production, the Navy turned its attention to industry veteran Blackburn, a production-quality aircraft arriving in May 1918. After some practical use of the type, some shortcomings were corrected, including a revised empennage and reinforced landing gear.

By October 1918, both Fairfield and Pegler were able to participate in serial production and put their available talent into the effort to produce some 70 aircraft (50 and 20, respectively).

Despite the promises, the war ended with an armistice in November 1918, and the often delayed T.1 was no longer in great demand. 300 cuckoos were originally ordered, although only 232 were realized in total (less than 100 were available when Germany surrendered).

The active T.1 remained in service until its final retirement in 1923, and the line never recorded combat use.

However, during its short service life, the T.1 was a fighter that was highly regarded by British pilots. The replacement Arabian engines did not work well, so 20 aircraft were modified to use 200 hp Wolseley "Viper" engines, these became the Cuckoo Mk II - making the original model the Mk. 1. At least one T.1 was equipped with a 275-horsepower Rolls-Royce Falcon III engine, but this form was not used in mass production.

Again, Sopwith B. 1 made it into two prototypes and that's it.

Outside the Royal Naval Air Service, the Cuckoo is operated by RAF Squadrons 185, 186 and 210. The Imperial Japanese Naval Air Service took over the inventory of 6 Mk.

II Gestalt aircraft that were critical to the development of the Japanese Navy's carrier-based aircraft theory prior to World War II (1939-1945).

Sopwith Cuckoo Specification

Basics

Years of Service

1918

Origins

UK

Status

retirement

does not work.

Crew

1

Production

232

Manufacturer

Sopwith Aviation Company - UK

Carrier

Imperial Japan; United Kingdom

Roles

Ground attack (bombing, strafing)

The ability to conduct air strikes against ground targets using (but not limited to) artillery, bombs, rockets, rockets, etc.

Special Mission: Anti-ship

Equipped to find, track, and attack enemy surface elements through visual acquisition, radar support, and ship-based weapons.

nautical/navy

Water mobility capability for a variety of land-based or ship-based maritime missions, supported by Allied Naval Surface Forces.

Intelligence Surveillance Reconnaissance (ISR), reconnaissance

Monitor ground targets/target areas to assess surrounding threat levels, enemy strength, or enemy movement.

Dimensions and Weight

Length

28.5 feet

(8.68m)

Width/span

46.8 feet

(14.25m)

Height

10.7 feet

(3.25m)

Cured weight

2,205 lbs

(1,000 kg)

MTOW

3,880 lbs

(1,760 kg)

Wgt Difference

+1,676 lbs

(+760 kg)

Performance

Installed:

1 x Sunbeam Arab V8 engine with 200 hp driving a twin-blade propeller in the nose.

Maximum speed

106 km/h

(171 km/h | 92 knots)

Maximum

12,106 feet

(3,690 m | 2 km)

Area

536 km

(540 km | 1,000 nautical miles)

Range (MPH) Subsonic: <614mph | Transonic: 614-921 | Supersonic: 921-3836 | Hypersonic: 3836-7673 | Hypersonic: 7673-19180 | Reentry: > 19030

Weapons

Typical???: 1 x 18" Mk. IX torpedo below the centerline of the hull.

Related stuff

1400 1514 1587 1765 1774 1775 1776 1782 1785 1786 1791 1797 1811 1813 1819 1840 1841 1842 1852 1853 1855 1856 1857 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1873 1874 1875 1877 1878 1885 1886 1888 1889 1895 1896 1897 1898 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022
Contact  |  Privacy Policy