Integrating PB2Y Coronado Stories
By the mid-1930s, America was no longer blind to the real possibility that war would sooner or later occur on its shores. Because of this, the U.S. Navy has moved to meet the need for a new generation of airship aircraft capable of long-range reconnaissance.
The Consolidated PB2Y Coronado series reflects exactly this - planned to replace the 1930s, but has successfully adopted the Consolidated PBY Catalina design.
The PB2Y Coronado first appeared in XPB2Y-1 prototype form in 1937 - beating Sikorsky's design - and almost immediately suffered from poor water-based handling and equally dangerous aerial instability, mainly due to Due to the single tail design. Because of this, the rear section has been redesigned to incorporate dual circular vertical fins that help with handling. The U.S. Navy adopted this redesigned variant as the PB2Y-2 and continued testing as needed.
The result was the need to add better armor protection and self-sealing fuel tanks to continue production of the PB2Y-3. This model later became the final production model and was also used in small numbers by the RAF.
In terms of design, the Coronado is known for its rather stout appearance, somewhat resembling a shortened Consolidated B-24 Liberator bomber, with the hull incorporated into the design. The flight deck is high up in the front of the fuselage, flanked by two Pratt & Whitney radial engines (these engines vary by model). The sizable ASV radome is clearly visible behind the cockpit.
The wings are mounted high and forward on the fuselage and have retractable wingtip floats that help establish better aerodynamic trends (this feature is similar to the PBY Catalina). The twin-fin tail segment is also placed high on the tail of the design.
The Coronado's weapons consist of a balanced set of offensive and defensive devices. Two 12.7 mm (0.50 caliber) M2 machine guns were mounted in a bow turret, a midship dorsal turret and a rear turret directly between the stern and the two tail fins. An additional 12.7mm machine gun was placed to fire in the hatches on the sides of the beam position.
To complement this weapon, the Coronado can play an offensive role, armed with bombs up to 1,000 pounds (internally mounted at the root of the wing) or two externally mounted Mark 13 torpedoes.
While the Coronado has a solid design, it's not up to the task of replacing the much-loved PBY Catalinas in long-range reconnaissance missions. Also, the Coronado is not specifically used as a bomber or anti-ship force, but is successfully filled in that role by similarly capable combined PB4Y-1 family and similar range aircraft, but used on land bases, so no special Water training operations.
In British service, the PB4Y Coronado was known as the Coronado Mk I, of which about 10 PB2Y-3 variants were assigned to the country. Several sub-variants of the PB2Y-3R have emerged - a dedicated transporter that can hold about 45 passengers or cargo - and the PB2Y-5R - a modified model for air ambulance missions, with a capacity of 25 liters.
In total, more than 200 Coronados were built, most of which were in service in the Pacific theater (excluding RAF models in the Atlantic).
Specification
Basic
Production
Roles
- Ground Attack
- Naval/Navigation
- Reconnaissance (RECCE)
Dimensions
79.40 ft (24.2 m)
35.05m
8.38m
Weight
18,568 kg
68,002 lb (30,845 kg)
Performance
Performance
223 mph (359 km/h; 194 knots)
20,505 ft (6,250 m; 3.88 mi)
2,371 miles (3,815 km; 2,060 nautical miles)
570 ft/min (174 m/min)
Armor
Default:
2 x 12.7mm machine guns in bow turret
2 x 12.7mm machine guns in the back turret
2 x 12.7mm machine guns in the rear turret
1 x 12.7mm machine gun in left beam position
1 x 12.7mm machine gun in right beam position
8 x 1,000 lb (454 kg) bombs internally fixed in wings or 2 x Mark 13 torpedoes (externally fixed)
Changes
XPB2Y-1 - Prototype designation; single tail fin; retractable wingtips float.
PB2Y-2 - Revised prototype design of XPB2Y-1; equipped with 4 x Pratt & Whitney R-1830 radial engines; twin tail fin design.
PB2Y-3 - Self-sealing fuel tank; improved armor protection; extended rear tub.
PB2Y-3R - Dedicated transport model; holds up to 45 passengers or equivalent cargo.
XPB2Y-4 - Prototype model equipped with 4 x Pratt & Whitney R-2600 model radials; slightly improved performance.
PB2Y-5 - low-altitude variant; equipped with R-1830-92 single-stage radial engine; PB2Y-3 model modified to this standard; extended rear tub.
PB2Y-5R - Air Ambulance Model
Coronado Mk I - British designation of the PB2Y-3 model.

