History

The Primoco One 150 is a Czech long-endurance unmanned aerial vehicle developed and produced by Primoco UAV in the Czech Republic. The company's predecessor platform, the One 100, completed its first test flight on 31 July 2015 at Tchořovice airport in South Bohemia, establishing the design foundation for the One 150. The One 150 completed its first military application flight test in September 2020, equipped with an L3Harris radio station and ANW2C data links from Persistent Systems. Engine performance testing for the One 150M variant was completed at the end of 2023. Full-scale structural tests at the Institute of Aeronautical Engineering of the Czech Technical University were successfully completed in 2024; Primoco described this as a world first for an unmanned aircraft, as full-scale structural testing had previously been applied only to manned aircraft. NATO STANAG 4703 certification was obtained in March 2025. The aircraft was showcased at Future Forces 2026 in Prague.

Design

The One 150 is a fixed-wing UAV with a fully composite airframe and fixed tricycle-style landing gear, powered by a four-stroke, four-cylinder, fuel-injected piston engine. The aircraft is fully autonomous and capable of fully automatic takeoff and landing, requiring only a suitable paved runway or an appropriate straight section of road for operations. A two-person crew consisting of a pilot and a sensor operator can manage multiple aircraft simultaneously from a single ground station. Primoco states that an experienced crew can prepare the UAV for operations within approximately 30 minutes. Communications are protected using AES 256 encryption, with direct control maintained within a radius of up to 200 km, while mission data can be transmitted in real time over substantially greater distances. Primoco states that the direct operating cost is 50 to 90 percent lower than an equivalent manned solution.

Specifications

  • Maximum takeoff weight: 150 kg
  • Maximum payload: up to 30 kg
  • Cruising speed: approximately 120 km/h
  • Endurance: up to 15 hours at cruising speed per Primoco's performance description; a separate technical parameter table on the company's product page lists 10 hours
  • Range: up to 1,800 km per Primoco's performance description; one source states an operational range of up to 2,000 km; the separate technical table lists a maximum range of 1,200 km

Payload configurations accommodate electro-optical cameras (resolution up to 4K, 90× optical zoom), thermal imaging systems, multispectral sensors, imaging equipment exceeding 150 megapixels, SAR radar with GMTI/MMTI functionality, SIGINT and ELINT equipment, VHF/UHF signal analysis, and communications and navigation jamming equipment. The airframe can be configured for ISR, communications support, electronic warfare support, border surveillance, and battlefield reconnaissance.

Program Status

Primoco states that the One 150 is the only certified UAV in its category in the world, a claim made in 2023. The STANAG 4703 type certificate allows export to any NATO member country without separate type testing per market. The company is approved as a military aeronautical design and production organization under the EMAR 21 framework and holds EASA LUC SAIL III authorization for a 150 kg fixed-wing aircraft. Primoco positions itself among Europe's leading manufacturers of medium-sized fully autonomous unmanned aircraft. In 2023, the company won orders for 33 One 150 drones. In the first half of 2024, new contracts covered 26 unmanned aircraft for more than CZK 500 million. Current production capacity is approximately 100 drones per year, with plans to expand to 250 through a new production, service, and training centre in Písek, southern Bohemia, planned for completion in 2027.

Operators

Primoco UAV has delivered One 150 aircraft to multiple customers across several continents. In November 2022, the company announced a contract for eight One 150 UAVs (EUR 6.8 million, with an option for sixteen additional aircraft) to a non-European customer; delivery includes UAVs, sensors, control stations, and training. In October 2022, a contract for two One 150 UAVs (EUR 1.7 million) was signed with a European customer. In June 2024, Primoco signed a contract for the delivery of two UAVs to an Asian customer for inspection, calibration, and evaluation of airport navigation equipment. The company signed a memorandum of cooperation with Airbus Defence in 2023. Primoco's aircraft are in operation on four continents.

ContactPrivacy Policy
Fatal error: Uncaught TypeError: mysqli_close(): Argument #1 ($mysql) must be of type mysqli, false given in /home/bosahost/tvd.im/engine/classes/mysql.php:238 Stack trace: #0 /home/bosahost/tvd.im/engine/classes/mysql.php(238): mysqli_close() #1 /home/bosahost/tvd.im/engine/modules/main.php(726): db->close() #2 /home/bosahost/tvd.im/engine/init.php(1017): include_once('/home/bosahost/...') #3 /home/bosahost/tvd.im/index.php(28): require_once('/home/bosahost/...') #4 {main} thrown in /home/bosahost/tvd.im/engine/classes/mysql.php on line 238