M1940 50mm (50-RM 40) History

The Soviet 50mm light infantry mortar of World War 2 (1939-1945) evolved along a singular line beginning with the 50-RM 38 model of 1938 which, itself, was influenced by the British Stokes 3-inch mortar design. While serviceable, the system relied on an inefficient manual gas management system to define precise engagement ranges and the 50mm projectile was limited in its reach and shock value. While the projectile was left unaltered, the RM-38 was developed into the slightly improved model of 1939 as the 50-RM 39 / RM-39. The RM-39 showcased a barrel length of 775mm and a weight between 14- and 17-kilograms depending on production. The original RM-38 measured with a 780mm barrel and a 12-kilogram weight.

In 1940 there proved yet another evolution in the 50mm light mortar line and this became the 50-RM 40 (M1940 or "Model 1940"). The weapon was consistent with previous offerings in being conventional in its form and function. There was a launch tube, baseplate and bipod comprising the entire system with included optics, as crude as they were. The bipod was manufactured of pressed steel. The basic accepted operation was retained - at least two crew, one to manage the launch tube and aiming and the other to feed projectiles into the muzzle. An awaiting firing pin ignited the propellant of each charge and sent it along its defined path.

As with the RM-38, the RM-40 proved no better in practice. The 50mm was still a limited projectile and the RM-40 held a limited range. It was, perhaps for the best, that the Soviet attention began turning to larger-caliber instruments with siege mentality in mind such as the massive 160mm mortar system of 1943. To that end, stocks of RM-40 and similar light mortars were used when available and in some number. As such, captured stocks then fell to the Germans who pressed them into action against their former owners under the army designation of 5cm Granatwerfer 205(r) - "r" to indicate their Russian origins.

As the RM-40 superseded the RM-39, it was itself surpassed by the all-new RM-41. Instead of it being based on the RM-38 and, therefore the British Stokes design, it was developed from study of captured German 50mm mortars.

M1940 50mm (50-RM 40) Specification

ROLES

- In-Direct Fire / Siege / Area Effect

STRUCTURAL

Overall Length:

630 mm (24. 80 in)

Barrel Length:

630 mm (24. 80 in)

Weight (Unloaded):

20. 50 lb (9. 30 kg)

Sights:

Included sighting device

PERFORMANCE

Action:

Manual Operation; Reusable

Muzzle Velocity:

310 feet-per-second (94 meters-per-second)

Rate-of-Fire:

15 rounds-per-minute

Effective Range:

2,624 ft (800 m; 875 yd)

VARIANTS

RM-40 - Base Model Designation; improved form of the Model 1939.

RM-41 - All-New design based on captured German 50mm specimens.

Related stuff

1400 1514 1587 1765 1774 1775 1776 1782 1785 1786 1791 1797 1811 1813 1819 1840 1841 1842 1852 1853 1855 1856 1857 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1873 1874 1875 1877 1878 1885 1886 1888 1889 1895 1896 1897 1898 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022
Contact